System Info; Extension; Current Call Svr; Terminal Type - Nortel 6120 Fundamentals

Warning Tones
Select Warning Tones to specify whether warning tones (such as system up
or down, or out of range) play. Warning Tones are enabled by default.
Display Contrast
Select Display Contrast to adjust the display for different lighting conditions.
Keypad Autolock
Select Keypad Autolock to configure the keypad to lock automatically when
the handset enters standby mode. You can disable the automatic locking
function (the default) or adjust the autolock for a 5, 10, or 20 second delay
before locking.

System Info

The following sections describe the System Info menu options.
Phone IP Addr
Select Phone IP Addr to view the IP address currently assigned to the
handset.
Server IP Addr
Select Server IP Addr to view the IP address of the SVP Server and the OAI
Server (if installed).
Firmware Version
Select Firmware Version to view the current firmware version of the
handset—the MAC address (the hardware identification number configured
at the factory) and the three files used by each version:
•
•
•

Extension

Select Extension to view the extension currently assigned to the handset.
You cannot configure the extension with this option.

Current Call Svr

Select Current Call Svr to view the current Call Server IP address and port
number.

Terminal Type

Select Terminal Type to view the type of PBX in use.
Copyright © 2007, Nortel Networks
.
Downloader: pd11gl3.bin
Functional: pd11xxx3.bin
Phintl: phintl24.bin or pi11xxx.bin
Nortel Communication Server 1000
WLAN Handsets Fundamentals
NN43001-505 01.04 Standard
Release 5.0 4 September 2007
WLAN Handset 2210/2211/2212 Standby menu 83