Read And Save A Handset Configuration; Handset - Nortel 6120 Fundamentals

54 WLAN Handset configuration
Read and save a handset configuration
Follow the steps in
an existing handset" (page 54)
already-configured handset. Before performing the following procedure,
the Configuration Cradle must be installed. For more information, see
Procedure 8 "Installing and configuring the Configuration Cradle" (page
Procedure 9
Reading and saving the configuration of an existing handset
Step
1
2
3
4
5
6
7
8
Copyright © 2007, Nortel Networks
.
Procedure 9 "Reading and saving the configuration of
Action
Start the Config Cradle software by double-clicking the
PhoneConfig.exe file of the tool.
Remove the battery from the handset.
Place the handset in the proper slot in the cradle.
See Figure 2 "Configuration Cradle" (page
Press the Read Phone soft key in the Config Cradle screen.
The configuration of the phone is read and appears in the right hand
column, labeled Phone settings.
Press the left arrow button:
The configuration data is copied from the Phone settings column to
the Editable settings column.
(Optional) Press the radio button associated with each item to
designate in which category (Sys, Grp, Usr) the item belongs.
Category
System (Sys)
Group (Grp)
User (Usr)
Enter a file name in the name box beside the category.
Press the Save button for the appropriate category to save the
settings.
The red box beside the Save button changes to green after the save
is complete.
Nortel Communication Server 1000
WLAN Handsets Fundamentals
NN43001-505 01.04 Standard
Release 5.0 4 September 2007
to read and save the configuration of an
50).
Description
System-wide settings
Settings for a particular group
Unique settings for a particular user
—End—
49).