Nortel 6120 Fundamentals page 155

Message
No Func Code
No Host IP (Addr)
No IP Address
No Net Access
No Net Found
(For the WLAN Handsets
2210/2211/ 2212 only.)
No Net Found
(For the WLAN Handsets
6120/6140 only.)
Copyright © 2007, Nortel Networks
.
Description
Handset firmware download files
are incorrect or corrupt.
The wireless handset is
configured for static IP (as
opposed to use DHCP) and
no valid host IP address (the
wireless handset IP address) is
entered.
Invalid IP address.
Cannot authenticate/associate
with AP.
This indicates any of the
following:
• No radio link
•
No ESSID—Autolearn
not supported (or)
incorrect ESSID
• AP does not support
appropriate data ranges
• Out of Range
• incorrect WEP settings
• Incorrect Security
settings
This indicates any of the
following:
• No radio link
• No ESSID—Autolearn
not supported (or)
incorrect SSID
Nortel Communication Server 1000
WLAN Handsets Fundamentals
NN43001-505 01.04 Standard
Release 5.0 4 September 2007
Dropped calls 155
Action
Reconfigured the handset to
gain access to the WLAN and
download new code.
Enter a valid IP address in the
configuration settings or change
to use DHCP.
Check the IP address of
the wireless handset and
reconfigure if required.
Verify the AP configuration.
Verify that all the WEP settings
in the handset match those in
the APs.
Verify that the AP is turned on.
Verify the ESSID of the wireless
LAN and enter or Autolearn it
again, if required.
Check the AP configuration
against the AP Configuration
Note.
Try getting closer to an AP.
Check to see if other handsets
are working within the same
range of an AP. If so, check the
ESSID of the handset.
Verify that all the WEP settings
in the handset match those in
the APs.
Verify that all the Security setting
in the AP.
Verify that the AP is turned on.
Verify the SSID of the wireless
LAN and enter or Autolearn it
again, if required.