Nortel 2212 User Manual
  1. Manuals
  2. Brands
  3. Nortel Manuals
  4. Handsets
  5. 2212
  6. User manual

Nortel 2212 User Manual

Nortel 2212: user guide
Hide thumbs Also See for 2212:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operation & Installation Manual, Quick Reference Manual
Nortel Communication Server 1000
WLAN Handset 2212
User Guide

Advertisement

Table of Contents
loading

Related Manuals for Nortel 2212

Summary of Contents for Nortel 2212

  • Page 1 Nortel Communication Server 1000 WLAN Handset 2212 User Guide...

  • Page 3: Revision History

    (off-hook) state and the ring volume on page December 2005 Standard 2.00. This document is up-issued to support the Nortel WLAN Handset 2212. August 2005 Standard 1.00. This is a new document developed to support the Nortel WLAN Handset 2212.
  • Page 4 Revision history...

  • Page 5: Table Of Contents

    Scrolling ... 24 Cleaning your handset Basic handset operation Turn on the WLAN Handset 2212... 27 Turn off the WLAN Handset 2212 ... 27 Make a call... 28 Make a headset call... 29 Answer a call ... 29 Hang up a call ... 30 Change the speaker volume ...
  • Page 6 Contents Security The headset Handset display User Option menu Lock the Keypad ... 41 Select a Language ... 42 Select Ring Options... 42 Select Phone Options ... 47 View system information... 52 View Extension ... 54 Call features Making calls Use Autodial ...
  • Page 7 Incoming calls Activate Call Pickup ... 69 Use Call Waiting ... 70 While away from your desk Use Call Forward ... 73 Use Internal Call Forward... 74 Talk with more than one person Use Call Join ... 75 Set up a conference call ... 75 Use Conferee Selectable Display...
  • Page 8 Contents Battery packs Low battery indicators ... 97 Remove and insert the battery pack ... 98 Dual Charger Use the Dual Charger... 100 Clean the Dual Charger ... 101 Quad Charger Use the Quad Charger... 104 Clean the Quad Charger... 104 Terms you should know Index Draft 0.01...

  • Page 9: Regulations And Safety Information

    WLAN Handset 2212 near life-support systems. • To minimize risk of interference, pacemaker users should NOT carry the WLAN Handset 2212 next to the pacemaker. • Avoid placing the handset near small metallic objects. The handset earpiece attracts magnetic objects.

  • Page 10: Radio Frequency (Rf) Information

    Regulations and safety information Radio Frequency (RF) information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

  • Page 11: Electromagnetic Interference And Compatibility

    CAUTION Loud noise environment: The WLAN Handset 2212 has been designed to produce optimal voice quality. However, when used in extremely loud noise environments (for example, close to working heavy machinery), users may experience degradation in call quality performance due to echo.
  • Page 12 Regulations and safety information Facilities To avoid electromagnetic interference and/or compatibility conflicts, turn off your radio product in any facility where posted notices instruct you to do so. Hospitals or health care facilities may be using equipment that is sensitive to external RF energy. Medical devices Pacemakers: The Health Industry Manufacturers Association recommends that a minimum separation of 6 inches (15 cm) be maintained between a handheld wireless...

  • Page 13: International Certifications

    International certifications Table 1 shows the international certifications applicable to the WLAN Handset 2212. Table 1 International certifications (Sheet 1 of 2) Australia Brazil Canada European Union Norway Switzerland Japan Mexico New Zealand Z233 Singapore Taiwan Hong Kong United States...
  • Page 14 Regulations and safety information Table 1 International certifications (Sheet 2 of 2) United States Part 15, part 68 IEC 60950...

  • Page 15: Specific Absorption Rate (Sar) Information

    Specific Absorption Rate (SAR) information Your wireless handheld portable telephone is a low power radio transmitter and receiver. When it is ON, it receives and also sends out radio frequency (RF) signals. In August 1996, the Federal Communications Commissions (FCC) adopted RF exposure guidelines with safety levels for hand-held wireless phones.
  • Page 16 Association (CTIA) website at http://www.wow-com.com. The only authorized headsets that may be utilized with the Nortel WLAN Handset 2212 are those obtainable from Nortel or its reseller partners. The measured SAR of the SNP2400 Wireless Handset is: 0.166 W/kG @ 2462 MHz (head) 0.0162 W/kG @ 2412 MHz (body).

  • Page 17: Your Wlan Handset 2212

    Your WLAN Handset 2212 This document describes the WLAN Handset 2212 and its features when operating on Nortel Communication Server 1000. The WLAN Handset 2212 is a fully functional handset specifically designed for the busy office environment. It is specially designed for 24-hour operation with a back-lit keypad, and has enhanced resistance to moisture.

  • Page 18: Handset Controls And Descriptions

    Figure 1 WLAN Handset 2212 controls Handset controls and descriptions Use the Power On/Start Call your WLAN Handset 2212. This key also affects some of the states of the handset (see Table 2 on page 20). Use the Power Off/End Call terminate an active call and turn off the handset.

  • Page 19: Status Indicators

    Use the Up, Down, side of the handset to navigate and activate the various menu options. Your WLAN Handset 2212 key to access the Feature Keys Line key emulates the six key to access the handset...

  • Page 20: The States Of The Handset

    “more items below or left” and “more items above or right.” The states of the handset The WLAN Handset 2212 can be in one of following states (see Table 2). Table 2 The WLAN Handset 2212 states (Sheet 1 of 3)
  • Page 21 Table 2 The WLAN Handset 2212 states (Sheet 2 of 3) State Description Active (idle) This is equivalent to a regular telephone being idle. The active (idle) state is reached in two ways: • An incoming call in the standby state causes the handset to go to the active (idle) state and begin ringing.

  • Page 22: Function Menu Items

    Function menu items Your WLAN Handset 2212 has six non-programmable Function menu items. Table 3 lists these menu items and their corresponding functions and descriptions. To activate the functions on your WLAN Handset 2212, press the (on-hook) or active (off-hook) states –...

  • Page 23: Enter Text Using The Handset Keypad

    Outbox Enter text using the handset keypad You can use the handset keypad to enter text on the WLAN Handset 2212. Press the key once for the first letter printed on that key, twice to get the second letter, and three times for the third letter.

  • Page 24: Scrolling

    Your WLAN Handset 2212 Scrolling Scrolling up, down, left and right is performed as shown in Table 4. Table 4 Scrolling functions To scroll: Volume Up button Down Volume Down button Left Right Use:...

  • Page 25: Cleaning Your Handset

    Cleaning your handset The WLAN Handset 2212 occasionally needs to be cleaned to maintain appearance. In general, wiping the handset surface with a plain-water-dampened cloth or paper towel removes most films or residues. If more rigorous cleaning is required, you can use: •...
  • Page 26 Cleaning your handset...

  • Page 27: Basic Handset Operation

    Basic handset operation Turn on the WLAN Handset 2212 To turn on the handset: When the download icon (K) is displayed, the handset is not ready to make or receive calls. Once the icon is removed, the handset can be used.

  • Page 28: Make A Call

    Press the Power On/Start Call You receive a dial tone. Dial the number. Dial calls exactly as you would with a regular telephone. You can dial extension numbers, internal numbers, or make external calls, depending on your system. Press the...

  • Page 29: Make A Headset Call

    Make a headset call To make a call using a headset: Answer a call The handset rings or vibrates to alert you to an incoming call. Additionally, a line number on the display flashes, and the display shows information about the call, such as the caller’s name and extension.

  • Page 30: Hang Up A Call

    Basic handset operation Hang up a call To hang up the handset: For extended battery life, press the the other party hangs up first. Change the speaker volume To change the speaker volume: Silence the ringer To silence the ringer: Press the Power Off/End Call sure to do this at the end of each call.

  • Page 31: Activate The Backlight

    Activate the backlight To activate the backlight: Basic handset operation Press any key to activate the backlight. It also activates when there is an incoming call. The backlight turns off after 10 seconds if no key is pressed.

  • Page 32: Feature And Function Activation

    Shortcut menu: Function menu – FCN key Use the Function key to view and activate the WLAN Handset 2212 functions. This includes the fixed functions (see Table 3 on page 22). Note: The menu displayed depends on the handset state.

  • Page 33: Soft Key Features

    To activate a function using the Function key: Soft key features The four soft keys on your WLAN Handset 2212 enable you to quickly activate soft key features. The display area directly above each soft key is programmed with a feature abbreviation.

  • Page 34: Using The Shortcut Keys

    Feature and function activation To activate a feature: Using the shortcut keys The WLAN Handset 2212 features are programmed on the following shortcut keys: • number keys 0 to 9 • star (*) key • pound (#) key These shortcut keys are displayed next to the feature abbreviations when you view the features.
  • Page 35 Security The WLAN Handset 2212 provides two security modes: • insecure — This is the default mode. • secure Your handset is pre-programmed by the system administrator for the type of security you need. For more information, talk to your system administrator.
  • Page 36 Security...

  • Page 37: The Headset

    The headset Nortel offers optional headsets (depending on market region) for use in noisy environments or if you need to have your hands free while talking. To use the headset, simply plug it into the jack on the bottom of the handset. The headset is specially designed to work with the WLAN Handset 2212.
  • Page 38 The headset...

  • Page 39: Handset Display

    Handset display This section summarizes the display features of the WLAN Handset 2212. Figure 3 WLAN Handset 2212 display The WLAN Handset 2212 has three display areas: • The upper display area is a status row that displays the handset status.
  • Page 40 Handset display...

  • Page 41: User Option Menu

    User Option menu When the WLAN Handset 2212 is in standby mode (power is on, but the handset is not in use), press and briefly hold the This section describes the following standard User Option menu items: • Lock Keys •...

  • Page 42: Select A Language

    To change the language: Languages Select Ring Options Phone Options presents a menu of choices: • Telephone Ring — presents a submenu of choices for setting: Ring Cadence • Ring Tone (see note) • Vibrate Cadence •...
  • Page 43 Note 1: Ring Tone does not appear in the menu when Ring Cadence is off. Note 2: Ring Delay does not appear in the menu when Ring Cadence or Vibrate Cadence is off. To select Ring Cadence: Ring Options Telephone Ring Ring Cadence User Option menu Press and hold the Function in the standby state.
  • Page 44 User Option menu To select Ring Tone: Ring Options Telephone Ring Ring Tone 10. Do one of the following: • Press the soft key to return to the previous menu and choose another option. • Press the Power Off/End Call to exit all menus and return to the standby state.
  • Page 45 Play To select Vibrate Cadence: Ring Options Telephone Ring Vibrate Cadence User Option menu • Tone 2 • Tone 3 • Tone 4 • Tone 5 To play the highlighted setting, press the Play soft key. 10. Press the Select button (or the key) to choose the tone.
  • Page 46 User Option menu To select Ring Delay: Ring Options through the menu and highlight Vibrate Cadence. Press the Select button (or the key) to select the option. Use the Down highlight one of the following: • Off — This is the default. •...

  • Page 47: Select Phone Options

    Telephone Ring Ring Delay Select Phone Options Phone Options presents a menu of choices: • Noise Mode — enables the user to adjust the handset for different levels of noise within the work environment. • Key Tones — controls whether pressing a key plays a tone.
  • Page 48 User Option menu out-of-range, or during power up and power down. • Display Contrast — controls the amount of contrast for the display. • Keypad Autolock — controls automatic locking of the keypad when the handset is in standby mode. To select Noise Mode: Phone Options Noise Mode...
  • Page 49 To change the key tones: Phone Options Key Tones User Option menu • Press the Power Off/End Call to exit all menus and return to the standby state. Note: You can also press the key from the top-level menu to exit and return to the active (off-hook) state.
  • Page 50 User Option menu To change the warning tones: Phone Options Warning Tones To change the display contrast: Phone Options Press and hold the Function in the standby state. Use the Down through the menu and highlight Phone Options. Press the Select button (or the key) to select the setting.
  • Page 51 Display Contrast To change the keypad autolock: Phone Options Keypad Autolock User Option menu Phone Options. Press the Select button (or the key) to select the setting. Use the Down through the menu and highlight Display Contrast. Press the Select button (or the key) to select the setting.

  • Page 52: View System Information

    User Option menu View system information The System Information option displays the following: • Phone IP Address — displays the Internet Protocol (IP) address assigned to the handset. • Server IP Address — displays the Server IP address. • Firmware Version — displays the software version running on the handset. Note: The information in the System Information option is for display purposes only.
  • Page 53 To view the Server information: System Information Server IP Addr To view the Firmware information: User Option menu Phone IP Address. Press the Select button (or the key) to view the IP address. Do one of the following: • Press the soft key to return to the previous menu and choose another option.

  • Page 54: View Extension

    User Option menu System Information Firmware Version View Extension The Extension option enables the user to view the extension number for the handset. This number is used to identify the handset. It displays when the handset is in the standby state. Note: The Extension option is for display purposes.
  • Page 55 User Option menu • Press the soft key to return to the previous menu and choose another option. • Press the Power Off/End Call to exit all menus and return to the standby state. Note: You can also press the key from the top-level menu to exit and return to the active (off-hook) state.
  • Page 56 User Option menu...

  • Page 57: Call Features

    Access to the features and functions in the following sections are dependent on your system configuration. Contact your system administrator to determine whether specific features are accessible through your WLAN Handset 2212. IMPORTANT! Call features...
  • Page 58 Call features...

  • Page 59: Making Calls

    Making calls This section describes features associated with making a call. Use Autodial The Autodial feature displays, stores, and automatically dials telephone numbers. To use Autodial: AutoDial To display Autodial number: To store an Autodial number: Go off-hook. Press the...

  • Page 60: Activate Ring Again

    Making calls Activate Ring Again Use the Ring Again feature if a busy tone sounds or when there is no answer after placing a call. Ring Again person you tried to call is available. number. Note: The Ring Again feature is available only when the handset is in the active state.

  • Page 61: Redial Last Number Called

    To use Last Number Redial: Redial Use Speed Call By entering a one-, two-, or three-digit code (0–999), use the Speed Call feature to store, edit, and automatically dial frequently called telephone numbers. To store a Speed Call number: SpCallCtlr Go off-hook.

  • Page 62: Make A System Speed Call

    Making calls SpCallCtlr To make a Speed Call: SpCallCtlr Make a System Speed Call Use the System Speed Call feature to dial Speed Call codes that override all restrictions on a call. To make a System Speed Call: SpCallUser Press the number key (1 through 6) corresponding to the Speed Call Controller save the code and number.

  • Page 63: Use Conference Hotline

    Use Conference Hotline Use the Conference Hotline feature to automatically dial a specific number. Other features, such as Call Redirection, can be added to Conference Hotline. Call Redirection redirects a Conference Hotline call to be answered only by a person. To use Conference Hotline: ConfHotlne Go off-hook.
  • Page 64 Making calls...

  • Page 65: While On An Active Call

    While on an active call This section describes features available during an active call. Place a call on hold Use the Hold feature when talking on one line and another call arrives on a second line. Retain the original call by placing it on hold and then answer the second call. To place a call on hold: To retrieve a call on hold: Transfer a call...

  • Page 66: Use Attendant Recall

    While on an active call Trns To go back to the original call, if the transfer is incomplete: Use Attendant Recall Use the Attendant Recall feature to contact an attendant during a call and to connect the call to the attendant. To contact the attendant while on a call: AttR...

  • Page 67: Use Call Park

    Use Call Park Use the Call Park feature to hold temporarily (park) and retrieve a call from any telephone or handset. Using Call Park does not tie up a line and, when configured network-wide, can be used across networks. A configured to automatically park most calls.

  • Page 68: Display Incoming Calls

    While on an active call CPrt Display incoming calls Use the Display feature to display a second incoming caller’s number and name (if available) during an active call, without interfering with the call in progress. To view the information on an incoming call while on a call in progress: Display...

  • Page 69: Incoming Calls

    This section describes features that are used with incoming calls. Activate Call Pickup Use the Call Pickup feature to pick up calls from any telephone or handset in the same pickup group or another pickup group. To answer a call in your own...

  • Page 70: Use Call Waiting

    To answer an incoming call while on another call: CallWait To return to the first telephone call: Dial the DN of the handset that is ringing (in your call pickup group). If the pickup DN or group number is...
  • Page 71 Press the Line key to access the Feature Keys menu. Press the number key corresponding to the first call. Note: The first call is on hold so the number indicator for that line is flashing. Incoming calls...
  • Page 72 Incoming calls...

  • Page 73: While Away From Your Desk

    While away from your desk This section describes features that are used when you are away from your desk. Use Call Forward Use the Call Forward feature to direct incoming calls to ring at another Line (DN). Note: If the handset is in the process of ringing, that call cannot be forwarded. To forward your calls or change the forward number: Frwr...

  • Page 74: Use Internal Call Forward

    Use Internal Call Forward Use Internal Call Forward to accept only calls originating at internal DNs to ring at another DN. Calls originating outside your telephone system still ring at your handset. Current incoming calls cannot be forwarded. To forward internal calls:...

  • Page 75: Talk With More Than One Person

    Talk with more than one person This section describes features that allow conversations among more than two people. Use Call Join Use the Call Join feature to connect calls to the current active call. This creates a conference between the two callers and yourself. To connect a call on hold (on a different line) to your current call: Conf...

  • Page 76: Use Conferee Selectable Display

    Talk with more than one person If the person you attempt to add to the conference is unavailable: Use Conferee Selectable Display Use the Conferee Selectable Display feature to list active conferees and disconnect a conferee from the conference call. To view active conferees: ConfSelDsp If necessary, repeat the procedure until...

  • Page 77: Use Group Call

    To disconnect a conferee: ConfSelDsp Use Group Call Use the Group Call feature to automatically call members of a predefined group, one at a time, until they all answer. To call group members: Talk with more than one person Press the Power Off/End Call configured, the Conference Count...
  • Page 78 Talk with more than one person GroupCall To answer a group call: Press the number key corresponding to Group Call feature. The feature automatically calls all group members. The icon flashes until all members answer. Note 1: The line numbers of the group members appear on the display as they answer.
  • Page 79 Talk with more than one person To end a group call: Press the Power Off/End Call key. Note: When the person who made the group call disconnects, the call terminates for all members of the group. However, the members of the group call can disconnect from the call and not affect other members on the call.
  • Page 80 Talk with more than one person...

  • Page 81: Work Without Interruption

    Work without interruption This section describes features that provide uninterrupted work time. Activate Make Set Busy Use the Make Set Busy feature to make your handset appear busy to all callers. To activate Make Set Busy MakeSetBsy To deactivate Make Set Busy: MakeSetBsy Work without interruption Go off-hook.
  • Page 82 Work without interruption...

  • Page 83: Other Call Features

    Other call features Use Call Page Connect to make an announcement Use the Call Page Connect feature to make an announcement over a paging system. Note: A Page key on an attendant console overrides and disconnects the telephones. The telephones must re-access the Page trunk. To connect to Call Page: To disconnect Call Page: Use Centrex/Exchange Switchhook Flash...

  • Page 84: Charge A Call Or Charge A Forced Call

    Other call features Charge a call or charge a forced call Use the Call Charge feature to charge a call to a specific account. The Forced Charge feature charges long-distance calls from a handset restricted to local calls. To charge a local or long-distance call to an account before you dial: Chrg Chrg...
  • Page 85 To charge a call to an account when you transfer a call: Trns Chrg Trns To charge a call to an account when you add someone to a conference call: Conf Chrg Conf Other call features Press the Transfer soft key. The call is on hold.

  • Page 86: Use Enhanced Override

    Other call features Use Enhanced Override Use the Enhanced Override feature to override an active call after you attempt a Forced Camp-on. Use Enhanced Override to make a simple call or a consultation call (such as placing a call on hold and calling another party). To use Enhanced Override: Override Override...

  • Page 87: Use Privacy Release

    Override To answer a call camped-on to your extension: Use Privacy Release Use the Privacy Release feature to enable one or more people who share your DN to join a call. To use Privacy Release: PrvR Other call features Press the number key corresponding to Override feature to initiate a Forced Camp-on.
  • Page 88 Other call features...

  • Page 89: Branch Office

    Branch Office A Branch Office handset can operate in Normal Mode or Local Mode. Normal Mode The handset registers with the Main Office and receives services from the Main Office. At any time during Normal Mode you can check local mode functionality (make and receive calls) by enabling Local Mode and returning to Normal Mode.
  • Page 90 Branch Office...

  • Page 91: Hospitality Features

    Hospitality features The hospitality features in this section are intended for hotel operations. Activate Message Registration Use the Message Registration feature to read, change, or reset meters that log your hotel calls. To read meters: MsgReg MsgReg To change a meter: MsgReg Hospitality features Go off-hook.

  • Page 92: Use Maid Identification

    To reset a meter to zero: MsgReg MsgReg Use Maid Identification Use the Maid Identification feature to track the cleaning status of rooms. The maid enters the information from the telephone in each room. To enter cleaning status: Press the key. Press the...

  • Page 93: Display Room Status

    RoomStatus RoomStatus Display Room Status The Room Status feature prints the status of a room using the Display Module. To read the status of a room: Hospitality features Press the number key corresponding to Room Status feature. Dial the Directory Number (DN) for the room for which the cleaning status is being changed.
  • Page 94 Hospitality features RoomStatus RoomStatus To change the status of a room: RoomStatus Press the Line key to access the Feature Keys menu. Press the number key corresponding to Room Status feature. Dial the Directory Number (DN) for the room. The DN displays followed by a two-digit code.
  • Page 95 RoomStatus Hospitality features Dial the Directory Number (DN) for the room. The DN displays followed by a two-digit code. The first digit indicates the occupancy status: = Room vacant = Room occupied The next digit indicates the cleaning status of the room: = Cleaning requested = Cleaning in progress = Room cleaned...
  • Page 96 Hospitality features...

  • Page 97: Battery Packs

    WLAN Handset 2212 battery pack location Low battery indicators The WLAN Handset 2212 notifies you when the charge on the battery pack is low by displaying the battery icon (B). If you are not in a call, you hear a loud beep. If you are in a call, you hear a soft beep through the earpiece every six seconds.

  • Page 98: Remove And Insert The Battery Pack

    Battery packs Remove and insert the battery pack To remove a battery pack: To insert a battery pack: To change a battery pack while in a call: Press down on the latch on the battery pack. The battery pack releases from the handset.

  • Page 99: Dual Charger

    Dual Charger The Dual Charger for the WLAN Handset 2212 (see Figure 5) fully charges the handset and one spare Lithium ion battery pack in approximately two hours (each). Chargers operate in a 50° to 85° F (10° to 30° C) environment. Do not expose them to freezing temperatures or direct sunlight.

  • Page 100: Use The Dual Charger

    Dual Charger Use the Dual Charger To charge the WLAN Handset 2212: To charge a battery pack: Press the Power Off/End Call terminate any calls. The handset can be off or in standby mode during charging. Place the handset, face forward, into the Dual Charger.

  • Page 101: Clean The Dual Charger

    Clean the Dual Charger Clean the Dual Charger by wiping the surface with a plain-water-dampened cloth or paper towel. A mild detergent solution can be used. Be sure to wipe away any detergent residue with a plain-water-dampened cloth. CAUTION Do not immerse the charger in water or other liquid. Do not pour liquids into the charger slot.
  • Page 102 Dual Charger...

  • Page 103: Quad Charger

    Quad Charger The Nortel WLAN Handset 2212 Quad Charger (see Figure 6) fully charges four Lithium ion battery packs in approximately two hours. Chargers operate in a 50° to 85° F (10° to 30° C) environment. Do not expose them to freezing temperatures or direct sunlight.

  • Page 104: Use The Quad Charger

    Do not push or pull the exposed battery pack contacts. Press both battery release buttons to remove the battery pack from the WLAN Handset 2212. Insert the battery pack into one of the four charging bays. The LED above the charging bay turns on.
  • Page 105 • Always use the Quad Charger provided to charge the battery pack. Other chargers can damage the battery pack. • Only use the original plug-in power adapter for the Quad Charger. • Do not dip the battery pack in water or throw into the fire. •...
  • Page 106 Quad Charger...

  • Page 107: Terms You Should Know

    Also known as an extension number. The Dual Charger is used to recharge the battery pack in the WLAN Handset 2212 and a spare battery pack. An area that shows status information about the feature in use. It also displays the name and status of the active session.
  • Page 108 Terms you should know Interrupted dial tone More... Paging tone Primary Directory Number Private Line Feature Keys Secondary Directory Number Shared Directory Number Soft keys (self-labeled) A broken or pulsed dial tone, heard when you access some of the features on your handset. An option enabling access to the multiple layers of the soft key features.
  • Page 109 Special dial tone Status Messages System or switch User Interface The three consecutive tones followed by dial tone that you hear when accessing handset features. A message displayed to inform the user of important information. A right arrow appears if more than one Status Message is present.
  • Page 110 Terms you should know...
  • Page 111 Index Active (idle) state Active (off-hook) state Active (on-hook) state Active call state Attendant Attendant Recall Autodial 59, 107 Battery packs Branch Office Call Forward Call Join Call Page Connect Call Park Call Party Call party information Call Pickup Call Trace, Malicious Call Waiting Centrex/Exchange Switchhook Flash Change battery pack while on a call...
  • Page 112 Index Hospitality features Indicator status Insert battery pack Internal Call Forward Interrupted dial tone Last Number Redial Line key Local mode Lock the keypad Low battery indicators Maid Identification Make Set Busy Menu key Message Registration More Key Normal mode Override a busy signal Paging tone Power off state...
  • Page 113 Index Up, Down, and Select buttons User Interface User Option menu 41, 42, 47, 52, 54...
  • Page 114 Index...

  • Page 116: User Guide

    Users must take full responsibility for their applications of any products specified in this document. The information in this documernt is proprietary to Nortel Networks. Nortel, Nortel (Logo), the Globemark, SL-1, Meridian 1, and Succession are trademarks of Nortel Networks. Document Number: NN-10300-071 Document Release: Standard 3.00...

Table of Contents