Feature Assignment - Nortel 6120 Fundamentals

•
BCM standby mode
With the Business Communications Manager (BCM) Server, redial,
speed-dial and phonebook are available in the handset and appear in the
second set of soft keys. USB appears only during handset configuration.
When more than four soft keys are available, left and right arrows appear,
as illustrated by
NAV < keys to toggle between sets.
Figure 11
Soft key sets
BCM active idle mode
From standby, press Actv to enter the active idle mode. The Ftre (Feature)
soft key provides access to programmed BCM system features while
off-hook. Press keypad numbers to activate features just as you do on the
IP Phone 2004.
BCM active mode
During a call, press FCN to display the Feature List and soft keys that
activate the following handset features:
•
•
•
•

Feature assignment

Table 20 "IP Phone 2004 mapping to the WLAN Handset 6120/6140" (page
128)
sequences on the WLAN IP 6120 handset.
Copyright © 2007, Nortel Networks
.
Exit
Figure 11 "Soft key sets" (page
Spkr (Speaker)
Hold
Mute
Exit
describes how the keys of the IP Phone 2004 are mapped to key
Nortel Communication Server 1000
WLAN Handsets Fundamentals
NN43001-505 01.04 Standard
Release 5.0 4 September 2007
WLAN Handset 6120/6140 127
127). Use the NAV > and