Managing and Troubleshooting the Versalar Switch Router 15000
type - Display the Contents of a File
To display the contents of an ASCII file, use the
displaying a file, you can enable the
a time.
To display a file, enter the following command:
type [ -x ] <vol>
is an optional argument to display the file in hexadecimal format. This
-x
argument allows files containing unprintable information to be viewed.
vol
specifies the slot number of the volume containing the file.
file_name
The file is displayed in the same format in which it is stored (unless you enter the
argument). Use the
-x
Examples
type 9:filea.txt
type -x 9:config
2-14
:
<file_name>
is the name of the file you are displaying.
command to display a log file in ASCII format.
log
Displays the contents of the filea.txt file, which is stored on the
volume in slot 9.
Displays the config file, which is stored on the volume in slot 9.
This file is displayed in hexadecimal format.
command. Before
type
function to display the file one screen at
more
302768-C Rev 00