Resetting A System Or Slot - Nortel Versalar 15000 Troubleshooting Manual

Resetting a System or Slot

The
active software image. To reset one or more slots, enter the slot number or
numbers after the
arguments, the router will reboot, using the default router software image and
configuration; this is equivalent to entering the
To reset (boot) the entire system, enter the following command:
reset
To reset one or more processor cards only, enter the
reset
reset
Examples
reset
reset 1
reset 1-5
reset 4,6
When you issue the
session, the results depend on:
•
•
Based on these variables, the router system or slot performs a restart, a
warm-boot, or a cold-boot operation.
Note: If you reset the slot in which the BCC is running, the BCC resets with
the next available slot.
302768-C Rev 00
command allows you to reset one or more slots and use the currently
reset
command. If you issue the
reset
[ <slot_no.> ]
[
<slot_no.>-<slot_no.>
Resets the entire system
Resets slot 1
Resets slots 1, 2, 3, 4, and 5
Resets slots 4 and 6
reset
The slot number that you designate in the command line
The slot number from which you issue the command
]
command from a local console rather than from a Telnet
Managing the Versalar 15000
command with no
reset
command.
boot
command as follows:
reset
5-7