Packet Capture Parameters - Nortel Versalar 15000 Troubleshooting Manual

Managing and Troubleshooting the Versalar Switch Router 15000

Packet Capture Parameters

Table 8-1
values.
Table 8-1.
BCC Attribute Name Values
capture-state
capture-buf-size
capture-packet-size
capture-direction
rx-trigger
tx-trigger
rx-filter-type
rx-filter-offset
rx-filter-reference
rx-filter-size
rx-filter-match
tx-filter-type
tx-filter-offset
tx-filter-reference
tx-filter-size
tx-filter-match
rx-filter2-type
rx-filter2-offset
rx-filter2-reference
8-26
lists each packet capture parameter, along with its valid and default
BCC Packet Capture Parameters
start, stop
integer
integer
rx, tx, both
full, match1, match2,
notused
full, match1, match2,
notused
capture, trigger, notused
integer
mac, dl, mcast
integer
octet string
capture, trigger, notused
integer
mac, dl, mcast
integer
octet string
capture, trigger, notused
integer
mac, dl, mcast
Default Value
stop
100 (in Kbytes or 1024 bytes)
96 (in bytes)
Note that packet capure size values are
rounded up to the nearest 32 bytes. For
example, if you enter a value ranging
from 1-32, it registers as a value of 32,
while values between 33-64 register as
a value of 64 and so on.
both
notused
notused
notused
0
mac
0
notused
mac
0
notused
0
mac
302768-C Rev 00
(continued)