Disabling Oam Loopback - Nortel Versalar 15000 Troubleshooting Manual

Managing and Troubleshooting the Versalar Switch Router 15000
To set the OAM down threshold for a PVC, navigate to the PVC prompt (for
example,
pvc-service/boston; pvc-group/boston/group1; pvc/11/1/0/32
oam-down-threshold <integer>
integer
an OAM loopback response before the ATM service record declares the PVC not
operational.
For example, the following command sets the OAM down threshold to 5 cells on
PVC 11/1/0/32:
pvc/11/1/0/32#
pvc/11/1/0/32#
To set the OAM up threshold for a PVC, navigate to the PVC prompt and enter:
oam-up-threshold <integer>
integer
service record declares the PVC operational.
For example, the following command sets the OAM up threshold to 5 cells on
PVC 11/1/0/32:
pvc/11/1/0/32#
pvc/11/1/0/32#

Disabling OAM Loopback

To disable OAM loopback for a PVC, navigate to the PVC prompt (for example,
box; atm/11/1; pvc-service/boston; pvc/11/1/0/32
pvc-service/boston; pvc-group/boston/group1; pvc/11/1/0/32
oam-loopback disabled
The following sample command disables OAM loopback on PVC 11/1/0/32:
pvc/11/1/0/32#
pvc/11/1/0/32#
6-8
box; atm/11/1; pvc-service/boston; pvc/11/1/0/32
is the minimum number of OAM cells for which a PVC does not receive
oam-down-threshold 5
is the minimum number of cells that the PVC must receive before the ATM
oam-up-threshold 5
oam-loopback disabled
or
box; atm/11/1;
) and enter:
or
box; atm/11/1;
) and enter:
302768-C Rev 00