Transferring A File To A Full Memory Card; Rm - Remove A File - Nortel Versalar 15000 Troubleshooting Manual

Managing and Troubleshooting the Versalar Switch Router 15000

Transferring a File to a Full Memory Card

If you attempt to transfer a file to a memory card that does not have enough space,
the name of the file with a length of 0 bytes appears in the memory card's
directory. Before you transfer another file to the memory card, you must optimize
the available space by completing the following steps:
Delete all unnecessary files from the memory card using the
1.
command.
Compact the file system using the
2.

rm - Remove a File

To remove (delete) specified files, use the
characters (
Caution: You cannot recover a file after it is deleted. The rm command does
not prompt you to verify a deletion.
To delete a file from the active volume, enter the following command:
rm <file_name>
To delete a file from a different volume, enter the following command:
rm <vol>
vol is the slot number of the volume containing the file.
file_name
Examples
rm alt.cfg
rm 9:l6_22.log
rm 9:*.log
2-12
and ? ) when issuing the
*
: <file_name>
is the name of the file.
Deletes the alt.cfg file on the active volume
Deletes the l6_22.log file on volume 9
Deletes all files with the . log file name extension on volume 9
command.
compact
command. You can use the wildcard
rm
command.
rm
rm
302768-C Rev 00