Viewing The Load Address And Size Of An Application - Nortel Versalar 15000 Troubleshooting Manual

Examples
prom -v 9:sspdiag.ppc 10
prom -w 9:bacboot.exe 10
Any one of the following:
prom -w 9:sspdiag.ppc 9, 10
prom -w 9:sspdiag.ppc 9 10
prom -w 9:sspdiag.ppc 9-10

Viewing the Load Address and Size of an Application

The
dynamically loadable application.
To view the addresses and sizes of the applications located on a specified slot or
slots, enter the
parameters:
loadmap
loadmap
slot_no.
enter the keyword
file_name
302768-C Rev 00
If the operation fails, the console displays a message describing the cause of
the failure.
loadmap command allows you to view the load address and size of each
loadmap
[ <slot_no.> ] [ <file_name>
[ <slot_no.> - <slot_no.>
is the number of the slot where the applications are located. (You can also
all to view the applications for all slots.)
is the name of the file to which you want to direct the output.
Verifies the contents of the diagnostics PROM
on slot 10 against the contents of the
sspdiag.ppc file on volume 9
Erases the bootstrap PROM on slot 10 and
copies the contents of the sspboot.ppc file on
volume 9 to the PROM on slot 10
Erases the diagnostics PROMs on slots 9 and
10 and copies the contents of the sspdiag.ppc
file on volume 9 to the PROMs on slots 9 and
10
command with one or more of the following optional
]
] [ <file_name>
Managing the Versalar 15000
]
5-15