Table of Contents
Advertisement
Switching actuator, 1-gang 16 A with binary input, 3-gang
1
Safety instructions
Electrical devices may only be mounted and connected by electrically skilled
persons.
Serious injuries, fire or property damage possible. Please read and follow manual
fully.
Danger of electric shock. Device is not suitable for disconnection from supply
voltage.
Danger of electric shock. Make sure during the installation that there is always suffi-
cient insulation between the mains voltage and the bus. A minimum distance of at
least 4 mm must be maintained between bus conductors and mains voltage cores.
Danger of electric shock on the installation. Do not connect any external voltage to
the inputs. The device might be damaged, and the SELV potential on the bus line will
no longer be available.
This manual is an integral part of the product, and must remain with the end cus-
tomer.
2
Device components
(1)
Programming LED
(2)
Programming button
(3)
Control cable (bus connection and extension inputs)
(4)
Load connection (relay output)
82404332
Image 1: Device components
29.11.2022
3 / 14
Advertisement
Table of Contents
