Anchorage Pointplease See Machine Configuration; Maintenance Support - Haulotte C8 Operator's Manual

Electric scissor lifts
C
- Machine layout
3.2 - ANCHORAGE POINT (PLEASE SEE MACHINE CONFIGURATION)
The machine is equipped with harness anchorage
points points which accept a single harness per
anchorage point. The anchorage points are identified by
the presence of the Anchorage point label.
If the local regulation imposes the wearing of a harness,
use the approved anchorage points.
3.3 -

MAINTENANCE SUPPORT

The maintenance support (on both sides of the
machine) must be put in place before any maintenance
operations.
24203 3227 0 E 10 09 EN 23
A
B
C
D
E
F
G
H
I