EDAN F15 Series User Manual page 87

Traditional 510(k) of Fetal & Maternal Monitor
F15 Series Fetal & Maternal Monitor User Manual
(1)
(7)
(5)
(6)
(12)
(2)
(8)
Item Information
1. Self-Check Trace
2. Paper Settings
3. Paper Type
4. Paper Style
5. FHR1 Mark
6. FHR2 Mark
7. FHR3 Mark
Trace
8.
Information List
9. Smart Note
10. HR Mark
11. SpO Mark
2
12. NIBP
014_14.1_F15_Series_User_Manual
(14)
(9)
(13)
Figure 5-1 an example of recorder paper with traces
The monitor prints a self-check trace after being switched on. It is used
to check if the recorder paper is properly loaded.
The paper settings of the monitor. It consists of the paper type and
paper style, e.g. "G 30-240", indicating that the paper type is "F9-G",
and the paper style is International. It is printed out to check if the
proper recorder paper is used.
There are two types of paper: F9-G and F9-P.
The FHR pane range indicates the paper style.
American style: 30 ~ 240
International style: 50 ~ 210
The trace marked with "FHR1" is the FHR1 trace.
The trace marked with "FHR2" is the FHR2 trace.
The trace marked with "FHR3" is the FHR2 trace.
A list of current date, time, FHR2 offset, FHR3 offset, HR, SpO
TEMP is printed at the start of the monitoring and every 10 minutes/20
minutes/30 minutes/ 60 minutes (optional) afterwards.
The annotation of the event mark below.
The trace marked with "HR" is the maternal HR trace.
The trace marked with "SpO
In the real-time printing mode, each NIBP measurement result is
printed on the paper in the order of SYS/DIA/MAP/PR.
(15)
(10)
(11)
Description
" is the maternal SpO
2
- 71 -
Printing
(4)
(3)
and
2
trace.
2
87／202