Table of Contents
Advertisement
Traditional 510(k) of Fetal & Maternal Monitor
F15 Series Fetal & Maternal Monitor User Manual
No.
Wireless
1
Strength Indicator
2
Device Number
3
Battery Indicator
4
Transducer Type
US Fetal Heart Signal
5
Quality Indicator
ECG signal strength
6
of TOCO Transducer
ECG signal strength
of
7
Fetal&Maternal
Module
Status of ECG leads
of
8
Fetal&Maternal
Module
Transducer
9
Connection Status
3.4.3 Close Wireless Transducer
1
Click the measurement numerics fields on the screen and enter its setup menu;
2
Select Close Probe;
3
Select OK and the transducer will be closed.
014_14.1_F15_Series_User_Manual
7
Signal
The wireless signal strength has four degrees:
When the transducer connects to the monitor successfully, a
number will appear in the center of the screen, which represents
the device no. , e.g.:
The battery level has five degrees:
For US transducer, US1, US2 and US3 will appear at the bottom
left corner of the screen according to the sequence of transducer
being taken out. For TOCO transducer, TOCO will appear at the
bottom left corner of the screen when ECG cable or electrode
sleeve is not connected, and when ECG cable or electrode sleeve
is connected, TOCO/MECG will appear.
US fetal heart signal quality has three levels:
When ECG cable is connected to TOCO transducer, the ECG
signal strength icon will appear at the bottom of the screen and it
has three degrees:
FECG signal quality icon(left) and MECG signal quality icon(right)
FECG
appear in the middle on the top of the screen and there are three
degrees:
The status of ECG leads is represented by two rows of four letters.
The first letter in the first row represents the status of top ECG
leads, and the following three letters represent the status of right
FECG
leg driven, C4 lead and F lead. The first letter in the second row
represents the status of bottom ECG leads, and the following three
letters represent the status of R, N and L lead. V represents
successful connection and X represents failed connection.
When the transducer connects to the monitor successfully, an icon
appears at the bottom right corner of the screen; when the
transducer fails to connect to the monitor, an icon
the bottom right corner of the screen
- 27 -
8
Description
Basic Operation
9
appears at
43／202
Advertisement
Table of Contents
