Rear Panel; Bottom Panel - EDAN F15 Series User Manual

Traditional 510(k) of Fetal & Maternal Monitor
F15 Series Fetal & Maternal Monitor User Manual

3.1.3 Rear Panel

4
RJ45 Socket: it connects the monitor to the central monitoring system (MFM-CNS,
MFM-CNS Lite) through Ethernet, which enables MFM-CNS, MFM-CNS Lite to achieve
1
bidirectional communication with the monitor.
HDMI Socket: it connects to an external display to project the display of the monitor, the
2
output resolution is 1080P
Antenna: If the monitor has a built-in wireless module, an antenna will be configured. It is
3
used to send signals of the bedside monitor to the obstetrical monitoring system.
4
Power Socket: for connecting AC power cable.
DB15: it connects the monitor to the central monitoring system (MFM-CNS, MFM-CNS Lite)
5
through serial port, which enables MFM-CNS, MFM-CNS Lite to achieve bidirectional
communication with the monitor.
USB Socket: supports USB 2.0 output. It connects approved USB devices, for example, USB
6
flash disk.

3.1.4 Bottom Panel

1
014_14.1_F15_Series_User_Manual
1
Figure 3-4 Rear Panel
Figure 3-5 Bottom Panel
- 16 -
2
5
2
Basic Operation
3
6
3
4
32／202