Indicators; Transducers And Cables - EDAN F15 Series User Manual

Traditional 510(k) of Fetal & Maternal Monitor
F15 Series Fetal & Maternal Monitor User Manual
1
Battery Compartment
2
Handle
3
Loudspeaker
4
Label

3.1.5 Indicators

There are four indicators on the top of the screen and the front panel. From the top down they are:
alarm indicator, CHARGE indicator, AC indicator and Power indicator. The table below lists their
meanings:
Indicator
Alarm
Indicator
Charge
Indicator
AC Indicator
Power
Indicator

3.2 Transducers and Cables

The transducers and cables of wired model include: wired US transducers, wired TOCO transducer,
wired DECG Fetal&Maternal Module, remote event marker, ECG cable, DECG cable, DECG-IUP
integrated cable, fetal spiral electrode, IUP catheter, SpO
The transducers and cables of wireless model include: wireless US transducers, wireless TOCO
transducer, wireless FECG Fetal&Maternal Module, wireless DECG Fetal&Maternal Module, ECG
cable, DECG cable, DECG-IUP integrated cable, fetal spiral electrode and IUP catheter.
You may not have all of these transducers and cables, depending on the monitor configuration
purchased.
014_14.1_F15_Series_User_Manual
Status of
Indicator
Flash or light up
in yellow or red
An alarm is active.
according to
alarm priority
Off No alarm is active.
On The battery is being charged.
Flash Battery low, please charge the battery in time.
Off No battery or the battery is fully charged.
On The monitor is connected to AC power supply.
The monitor is not connected to AC power
Off
supply.
On The monitor is powered on.
Off The monitor is powered off.
- 17 -
Meaning
sensor, NIBP cuff and TEMP sensor.
2
Basic Operation
33／202