Jumper Setting Description - Boser HS-4010 Manual

2.6 Jumper Setting Description

A jumper pin-set is ON as a shorted circuit with a plastic cap inserted
over two pins. A jumper pin-set is OFF as a open circuit with a plastic
cap inserted over one or no pin(s) between pins. The below figure 2.2
shows the examples of different jumper pin-set setting as ON or OFF in
this manual.
Figure 2.2
All jumper pin-set already has its default setting with the plastic cap
inserted as ON, or without the plastic cap inserted as OFF. The default
setting may reference in this manual with a " * " symbol in front of the
selected item.
13