J12: Coppermine or Tualatin CPU Select
J12
Short
Open
3.6
System Memory
The HS-6250 provides two DIMM sockets. The maximum capacity of
the onboard memory is 1GB. Please be advised you must use the
memory that can support 133MHz FSB to support 133MHz processor
in system.
3.7
DiskOnChip Address Setting
The DiskOnChip function allows the system to boot or operate
without a FDD or a HDD. DiskOnChip modules may be formatted as
drive C or A. With DiskOnChip, user may also execute DOS
commands such as FORMAT, SYS, COPY, XCOPY, DISCOPY and
DISKCOMP etc.
The U9 location onboard the HS-6250 is the DiskOnChip module
socket. Jumper JP3 (1-4) assigns the address setting of the installed
module. If you have additional memory devices in the system, please
set both at different memory address mapping to avoid the mapping
area conflicts.
JP3(1-4): DiskOnChip Address Select
Address
* D000
D800
Description
Tualatin
* Coppermine
PINS 1-2
PINS 3-4
Short
Short
Open
Short
13