Tools And Fasteners Needed - HunterDouglas PowerView Gen 3 Automation Manual

GETTING STARTED
Thank you for purchasing Hunter Douglas Duette
PowerView Gen 3 Automation. With proper installation, operation, and care, your new
®
shades will provide years of beauty and performance.
Please thoroughly review this instruction booklet and the enclosed packing list before
beginning the installation.

Tools and Fasteners Needed

⁄ " Hex, Flat blade, and Phillips screwdrivers
1
■
4
Level (laser level is recommended)
■
Measuring tape and pencil
■
Power drill, ⁄ " drill bit, and
3
■
32
In addition, you will need fasteners designed to work with your specific mounting surface(s).
#6 Hex Head Screws (Provided). Two 1
■
Longer #6 Hex Head Screws (Not Provided). If using spacer blocks, use #6 screws
■
long enough for a secure attachment.
#6 Flat Head Screws (Provided). If end mounting the shade, use two 1
■
installation bracket.
Speed Nuts and Screws (Provided). Extension brackets come with speed nuts and
■
screws.
Drywall Anchor (Not Provided). Use drywall anchors when mounting into drywall.
■
#6 x 1 "
1
2
Hex Head Screw
(Provided)
2
⁄ " hex driver
1
4
Longer #6 Hex Head Screw
for Use
with Spacer Blocks
(Not Provided)
and Applause Honeycomb Shades with
® ®
⁄ " screws are provided per installation bracket.
1
2
#6 Flat Head Screw
for Use
with End Mounts
(Provided)
⁄ " screws per
1
2
Speed Nut and Screw
(Two Provided
with Each
Extension Bracket)