Care; Removing The Shade; Cleaning Procedures - HunterDouglas PowerView Gen 3 Automation Manual

CARE

Removing the Shade

Lower the shade approximately 4".
■
While holding the headrail, push
■
back on the bottom tab of the
installation bracket with a flat
blade screwdriver to release the
bottom edge of the headrail.
After releasing the bottom edge,
■
roll the back of the headrail down
and out from the bracket.

Cleaning Procedures

Hunter Douglas Duette
dust-resistant fabric which repels dirt and dust. For most honeycomb fabrics, the following
cleaning options are available.
Dusting
Regular light dusting with a feather duster is all the cleaning needed in most
■
circumstances.
Vacuuming
CAUTION: Do not vacuum Elan
For deeper cleaning, vacuum gently with a brush attachment.
■
Compressed Air/Hair Dryer (Cool Setting)
Use compressed air or a hair-dryer on a cool setting to blow dust and dirt off shades.
■
Spot-Cleaning
CAUTION: Do not spot-clean Alexa, Alexa Metallic
Esprit , India Silk , Jardin
™ ™
Prepare a solution of warm water and a mild detergent.
■
Dampen a clean cloth in the solution and wring it out.
■
Dab the spot with the dampened cloth until it is removed. Do not rub the fabric.
■
Allow the shade to dry in the completely lowered (or closed) position.
■
34
Back of
Shade
and Applause Honeycomb Shades are made of anti-static,
® ®
fabrics.
®
, Leela , Macon
™ ™
Bracket
Headrail
Bottom
Tab
, Apollo , Calypso
™ ™
, and all Batiste fabrics.
™
Remove
, Commercial, Elan,
™