Resetting The Shade - HunterDouglas PowerView Gen 3 Automation Manual

OPERATION
Further Operation and Programming Information
PowerView App
®
The PowerView App is required to program PowerView Gen 3 shades, remotes, and
®
gateways. The App is compatible with Apple
more information regarding setup and operation using the PowerView App, refer to
https://help.hunterdouglas.com/s/powerview-gen-3-manuals.
PowerView Gen 3 Gateway
®
The PowerView Gen 3 Gateway is used to control shades in larger projects as well as
®
integrate PowerView Gen 3 shades with third-party integration systems. For information
regarding programming of PowerView Gen 3 Gateways, refer to the
Automation Gateway
PowerView Gen 3 Remote
For more information regarding operation and programming of the PowerView Gen 3 Remote,
refer to the digital PowerView Gen 3 Automation Remote Control Guide.

Resetting the Shade

Calibration Reset
The calibration reset is used to recalibrate the shade's travel limits. This action is performed
in the PowerView App.
Select Calibrate Shade in the Advanced Options section of the Shade Settings menu in the
■
PowerView App.
The shade will touch off on end limits, then finish in the closed position. When the shade
■
stops moving, calibration is complete.
Resetting Shade Programming
The PowerView App may be used to modify or reset any shade programming to PowerView
Gen 3 Remotes, and Gateways. Shades may be added to or removed from Rooms in the
App at any time. If necessary, shades may also be deleted from the PowerView App in the
Advanced Options section of the Shade Settings menu.
Electronic Limit Adjustments
Electronic limits are set at the factory and normally do not require readjustment. For window
treatments that may need additional adjustment or to set custom limit positions, go to Shade
Settings in the PowerView App to adjust limits.
26
Guide.
and Android smartphones and tablets. For
™
®
PowerView Gen 3