HunterDouglas PowerView Gen 3 Automation Manual page 33

Problem Rechargeable battery needs recharging.
Solution There are two methods for charging the rechargeable battery wand — the
dual charging station or the single charger.
CAUTION: The rechargeable battery wand can only be charged with these
Hunter Douglas provided charging options. Attempting to charge battery
wands with an alternative charger may result in permanent damage.
Removing the Rechargeable Battery Wand from the Mount
To safely remove the rechargeable battery wand from your shade, grasp
■
the end of the battery wand that is furthest away from the power socket.
CAUTION: Grasp the wand firmly prior to removal.
Using the indentation on the end of the battery wand, use your index finger
■
to pull the battery out of the mount.
NOTE: The mount should remain installed and plugged into the shade
cable during this process. You will simply remove the wand from the
mount.
Recharging Via the Dual Charging Station
Plug the dual charging station into a standard AC outlet.
■
Insert the nose of the rechargeable battery wand into
■
one of the slots of the dual charging station.
The battery will firmly snap into place. A red light
■
indicator on the front of the charging station will turn
on when the battery wand has been properly inserted
and being charged.
Once the battery has been fully recharged, the red
■
light indicator will turn green. Charging may take up
to three hours, depending on your battery level.
Remove the battery wand from the charger.
■
(Continued on next page.)
TROUBLESHOOTING
31