Kodak X-Omat 2000 Operator's Manual page 5

Racks and Crossovers
Figure 3
DEVELOPER/FIXER
CROSSOVER ASSEMBLY
FIXER/WASH
CROSSOVER
ASSEMBLY
WASH
RACK
FIXER
RACK
DEVELOPER
RACK
FEED SHELF
7C8770 – 19JAN99
DRYER
ASSEMBLY
DETECTOR
CROSSOVER
ASSEMBLY
H172_1001CCA
H172_1001CC
[5] Install the Top Cover on the Processor.
[6] Allow the developer solution to reach the correct
temperature.
Recommended developer temperatures:
Cycle type Developer Temperature
Standard 33.3 0.3°C (92.0 0.5°F)
Rapid 34.4 0.3°C (94.0 0.5°F)
Note
The Temperature Ready Light flashes or turns off when
the developer solution is at the correct temperature.
[7] Press the Run/Standby Switch.
[8] When the Temperature Ready Light flashes, feed
a sheet of Kodak Roller Transport Cleanup Film
into the Processor.
[9] Adjust the Dryer Temperature Control Knob to the
lowest setting to dry the film.
Processing Film
5