Table of Contents
Advertisement
Introduction
The C01 Special Option for Long Range Linear Measurements is an option of
the Keysight 5519A and 5519B Lasers, for use in the Keysight 5530 Laser
Calibrator system to facilitate long range linear measurements.
Specifications
Range
With Keysight 05518-91005
Long Range Adapter
Without Keysight 05518-91005
Long Range Adapter
Accuracy
Resolution
Maximum Velocity
Components
The 5519A and 5519B Long Range Option comprises the following
elements (see
•
•
•
Keysight 5519A and 5519B User's Guide
(Operating range depends on environmental conditions.)
Up to 80 meters (260 ft), typical. In some environments the
usable range may be more than 120 meters (390 ft).
Up to 40 meters (130 ft).
Same as standard system.
Metric Units Mode: 1 nanometer (10
English Units Mode: 0.04 micro-inch
Using Keysight 5519A Laser: 700 mm/s (27.6 in/s)
Using Keysight 5519B Laser: 1000 mm/s (39.4 in/s)
Figure 20
on page 46):
A Long Range Adapter, Keysight part number 05518-91005. This optical
element is attached to the measurement face of the Keysight 10766A
Linear Interferometer.
A selectable small aperture in the laser's lower (return) beam port.
A Receiver Gain Switch Lever, on the laser's front panel. Increased gain is
required for long range measurements.
5 Using the C01 Special Option for Long Range Linear Measurements
-9
m)
45
Advertisement
Table of Contents
