Recall The Data - Keysight HeNe 5519A User Manual

Recall the Data

You can recall a sample file for each measurement type to familiarize yourself
further with the display and analysis features of the Dimensional Metrology
Software. For linear measurements, click on the Open icon on the Linear Display
(Figure 10
the default file location. A data file contains the following information:
•
•
The Setup option controls how the data sets are loaded when a user enters a new
measurement. Click on the Setup icon on Metrology Main Display
page 29), then select option in Setup section (Figure 19).
Keysight 5519A and 5519B User's Guide
on page 30), select Setup + Data ..., then highlight the file Sample.Lin in
Setup Data
- Measurement Setup:
Travel and number of cycle, Target positions, Trigger type, Units, Material
Compensation, other (varies by measurement)
- Machine Information:
Name of Inspector, Location, Machine Name, Machine Type, Machine
Serial No., Machine Model No., Asset No. Date of Test, Comments
- ISO Information:
Measuring Information, Test Conditions, Test Parameters, Test Location,
Estimate of Measurement Uncertainty
Measurement Data
-
Measurement data collected, linear errors, straightness, et, al. (varies by
measurement)
Figure 19. Setup Menu
4 Using Keysight 5519A/B with the 5530 Laser Calibration System
(Figure 9 on
41