Install The Print Server; Connect The Printer Cables; Connect The Network Cables - NETGEAR PS104 Installation Manual

Install the Print Server

You can place the print server on a desktop or any flat surface. To save work
space, you can also mount the print server with Velcro strips on the side of a
printer.

Connect the Printer Cables

Connect a cable (not provided) from the printer to the parallel PRINTER port on
the print server. If you are connecting one printer to the Model PS110 Print
Server, you can use either of the ports.

Connect the Network Cables

Using the 10BASE-T Network Ports
Use the following table for setting the push button switch and for selecting
either a crossover or straight-through cable when connecting the print server to
other devices.
Connecting Network Port
Model PS104 Print Server
Port 1 set to Uplink
Port 1 set to Normal
Ports 2 through 4
Model PS105 Print Server
Port 2 set to Uplink
Port 2 set to Normal
Ports 3 through 5
Model PS110 Print Server
Note: Ethernet specifications limit the twisted pair cable (called a
twisted pair segment) extended from a network port to 100 meters in
length.
Model PS104/PS105/PS110 Print Server Installation Guide
Connecting Device Cable Used
Hub or switch Straight-through cable
PC or router Straight-through cable
PC or router Straight-through cable
Hub or switch Straight-through cable
PC or router Straight-through cable
PC or router Straight-through cable
Hub or switch Straight-through cable
PC Crossover cable