1
Install the Print Server
The print server can be placed on a desktop or any flat surface. To save work space, the print
server can also be mounted with Velcro strips on the side of a printer.
2
Connect the Printer Cables
Connect a cable (not provided) from the printer to the parallel PRINTER port on the print server.
If you are connecting one printer to the Model PS110 Print Server, you can use either of the ports.
3
Connect the Network Cables
The Model PS104 Print Server has four 10BASE-T network ports; the Model PS110 Print Server
has one 10/100BASE-T network port.
Use the following table for setting the push button switch and for selecting either a crossover or
straight-through cable when connecting the print server to other devices.
Connecting
Network Port
Model PS104 Print Server
Port 1 set to Uplink
Port 1 set to Normal
Port 2 through 4
Model PS110 Print Server
Note: Ethernet specifications limit the twisted pair cable (called a twisted pair
segment) extended from a network port to 100 meters in length.
Model PS104 and Model PS110 Print Server Quick Installation Guide
Connecting
Device
Cable Used
Hub or switch
Straight-through cable
PC or router
Straight-through cable
PC
Straight-through cable
Hub or switch
Straight-through cable
PC
Crossover cable