8-28 Nortel keyboard dialing
Table
Example script file
Prompt
DTE RESPONSE:
HOST PROMPT:
DTE RESPONSE:
HOST PROMPT:
PRIVACY MODE
END SCRIPT
Escape sequences
The escape code can be modified at either the Main Script menu or just
before activating the learn mode in the Learn Script menu.
After establishing a call in the learn mode, the escape sequence performs
one of the following tasks:
Incoming calls
Manual answer
Procedure 8-14 is used when the user's answer mode is set for Manual
Answer and an incoming data call occurs. If the user changes the speed of
the terminal without re-autobauding, the data displayed on the screen at Step
1 is meaningless. If the call is released at Step 1, the message
555-4001-114 Standard 10.02 November 1999
8-3xxx
(continued)
If the MCA receives one escape character, it inserts one pause (lasting
one second) into the script file. The user may enter as many consecutive
pauses as needed.
If the MCA receives two escape characters, it puts the user into the
privacy mode. This mode is used for password protection because any
additional characters entered by the user are not stored in the script. The
privacy mode is terminated by a carriage return from the user.
A sequence of three escape characters saves the script to the MCA's
electronically erasable programmable read-only memory (EEPROM).
The user is not interrupted, and the data call continues without losing
data.
User input
V
User ID
SLLEA01
Password
—end—
is
RELEASED