2-2 Installation procedures
Figure
View of jacks and tabs at base of telephone
5
6
7
8
555-4001-114 Standard 10.02 November 1999
2-1xx
If
you are installing the the M2006, an
older model M2008, M2008HF or
newer model M2008 with display, or
an M2616
Connect the 2-conductor line cord to telephone base. See Figure 2-1.
Tuck the line cord under the seven restraining tabs.
Response:
This allows the telephone to sit level on the desk.
Insert line cord into wall jack.
Response:
The TELADAPT connectors have a latch-tab, which ensures correct alignment
and prevents the cord from being pulled out inadvertently during service.
Restraining tabs
for line cord
Line cord connector
Handset connector
Restraining tab for handset
Do
Steps 6 through 9 and Steps 15
through 23