2-4 Installation procedures
Procedure 2-2
Installing the data terminal
1
2
3
4
5
Figure
2-2xx
Data terminal and MCA power supply connections
RS-232-C Interface
Flashing LED
555-4001-114 Standard 10.02 November 1999
Connect the RS-232-C interface connector from the data terminal to the
matching header connector in the back of the Meridian modular telephone.
(See Figure 2-2.)
Insert the two captive screws in the connector body into the threaded holes in
the header connector, and secure tightly to prevent accidental disconnection
during data terminal operation.
Plug the power supply/converter connector securely into the power jack that is
to the right of the RS-232-C connector.
Plug the power supply/transformer into the nearest ac outlet.
You have successfully completed this procedure.