Nortel Meridian SL-100 Reference Manual page 62

2-38 Installation procedures
Procedure 2-13
Performing the Meridian modular telephone self-test
1
2
3
4
5
6
7
8
9
10
11
555-4001-114 Standard 10.02 November 1999
Unplug the line cord from the telephone.
Begin the test by plugging in the line cord while holding down the RLS or
Goodbye key.
Response:
Speaker beeps once and all LCDs flash. The Message Waiting lamps light
steadily. The following messages appear on the display.
LOCAL DIAGNOSTIC MODE
PRESS RLS KEY TO EXIT
Let go of the RLS or Goodbye key.
Result: The handset is on hook.
Press each function key, from key 1 to 16. If you have key or display-based
expansion modules, continue pressing the function keys in any order.
Result:
Adjacent LCD goes off when a key is pressed.
Press the Hold key.
Result:
Speaker beeps.
Press each dial pad key.
Result:
Speaker beeps each time a key is pressed.
Lift the handset (if applicable).
Result:
Speaker beeps.
Press the dial pad keys.
Result:
Handset beeps.
Replace the handset.
Plug in the headset (if applicable).
Result:
Speaker beeps.
Press the dial pad keys.