Ring Again Feature Cancellation (P39); Full Duplex/Half Duplex (P40,P41) - Nortel Meridian SL-100 Reference Manual

2
3
4
5

Ring Again feature cancellation (P39)

Procedure 7-14 describes the steps required to cancel a Ring Again
previously activated by a keyboard command.
Note: The P in the following procedure represents the Program key.
Procedure 7-14
Cancelling Ring Again
1
2
3

Full duplex/half duplex (P40,P41)

Procedure 7-15 describes how to choose between half or full duplex.
Note: The P in the following procedure represents the Program key.
Procedure 7-15
Choosing between half or full duplex
To choose between half or full duplex:
1
Meridian SuperNode MSL-100 Meridian Modular Telephones Reference Manual MSL11
Response:
Remote loopback is activated for the next data call only.
Press P to save and exit the command.
Response:
The set exits the programming mode.
Press P37 to turn remote loopback off.
Press P to save and exit the command.
Response:
The set exits the programming mode.
You have completed this procedure.
Press P39 to cancel a previously activated Ring Again.
Response:
DATA RING AGAIN CANCELLED
Press P to save and exit the command.
Response:
The set exits the programming mode.
You have completed this procedure.
Press P40 for full duplex.
Keypad dialing 7-15