Music On Transfer (Mot); Agent Support - Nortel Meridian SL-100 Reference Manual

6-30 Meridian SL-100 features
Figure
Table AUDIO datafills
AUDIOKEY

Music On Transfer (MOT)

The Music On Transfer (MOT) feature provides audio to the held party of
3WC or CXR as soon as the conference or transfer is initiated. When caller
A is transferred or conferenced by caller B to caller C, caller A is connected
to an audio source, such as music for example. When the call is completely
transferred or conferenced, or the second leg is dropped by caller B, the call
is re-established on the line and the audio source is terminated. The
functionality is provisioned by assigning MOT through SERVORD on the
PDN.
This feature was developed to provide audio on CXR/conference for IBN,
MBS and IVD sets only.
The KSMOH feature can also be used when a held party is part of
3WC/CXR. However, the held party only hears music after the holding party
completes the dialing sequence for the third party. In other words, the held
party hears silence until all digits are dialed. The MOT feature provides
audio immediately when the holding party begins the transfer process (flash
and dial digits).

Agent support

The MOT feature supports IBN sets, all LCCs that are supported by key
sets, and IVD sets.
555-4001-114 Standard 10.02 November 1999
6-3xxx
AUDIO1 KSMOH
AUDIO1 PHOLD
AUDIO1 CHD
AUDIO1 MBSCAMP
AUDIO2 KSMOH
AUDIO2 PHOLD
AUDIO2 CHD
AUDIO3 KSMOH
AUDIO3 PHOLD
AUDIO3 CHD
AUDIOKEY
( MUSIC MUSICCLLI 0) $
( MUSIC MUSICCLLI 1) $
( MUSIC MUSICCLLI 2) $
( MUSIC MUSICCLLI 3) $
( MUSIC MUSICCLLI 4) $
( MUSIC MUSICCLLI 4) $
( MUSIC MUSICCLLI 4) $
( MUSIC MUSICCLLI 5) $
( MUSIC MUSICCLLI 6) $
( MUSIC MUSICCLLI 7) $