Table of Contents
Advertisement
Model
Operating and
Storage Humidity
Storage
Temperature
Operating and
Storage Altitude
Ingress
Protection
Applied Part
Alert Audible
Output
TX/RX
Frequencies
Bandwidth
Maximum Output
Power
156
G7 sensor/transmitter
Humidity: 10%–90% RH
Temperature:
35.6°F–86°F
Store sensors in a cool,
dry place
-1,253 feet to 16,406 feet
IP58: Protected from
ingress of dust; Protected
from submersion in the
water up to depth of 8 feet
for 24 hours
Type BF applied part
N/A
2.402–2.480 GHz
1.07 MHz
1.0 mW EIRP
Dexcom receiver
Humidity:
10%–90% RH
Temperature:
32°F–104°F
-1,253 feet to
16,406 feet
IP54: Protected
from ingress of
dust; Protected
from splashing
water in any
direction
No applied parts
50dBA at 3 feet
1.39 MHz
2.4 mW EIRP
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the G7 and is the answer not in the manual?
Questions and answers
Dexcom G7 continues to show readings 50 or 60 points higher than when I stick my finger and use the supplied recorder. Why?
The Dexcom G7 may show readings 50 or 60 points higher than fingerstick measurements due to several reasons:
1. Sensor's First Day: Newly inserted sensors may show larger differences, which usually decrease over the first 24 hours.
2. Pressure on Sensor: If something is pressing on the sensor (e.g., lying on it), it can affect readings. Removing the pressure can help.
3. Rapid Glucose Changes: Blood glucose changes before interstitial fluid glucose, so fast changes can cause differences between meter and sensor readings.
4. Fingerstick Issues: Inaccurate fingerstick readings can occur if hands are not washed properly or test strips are expired or used incorrectly.
These factors can cause temporary differences between Dexcom G7 and fingerstick readings.
This answer is automatically generated
How high does the Dexcom 7 reciever go?