Management Interfaces 1.7.1 V.24 Interface (External Management) - Hirschmann BAT450-F User Manual

Power LS/DA
WLAN 1 WLAN 2
Power
Color Activity
Green Lights up
Red flashing
green/red Short flashing
green/red Long flashing
WLAN 1, WLAN 2
Color Activity
— off
Green flashing
Green Inverse flashing
Green flashing
Red flashing
1.6.2 LS/DA
These LEDs display port-related information. During the boot phase, they
indicate the status of the boot process.
LS/DA
Color Activity
— off
Green Lights up
green/yello flashing
w
Yellow Lights up
1.7 Management interfaces
1.7.1 V.24 interface (external management)
This interface is a 4-pin, A-coded M12 socket.
Installation BAT450-F
Release 03 08/2016
Meaning
LED lights up after the configuration
Device has detected at least one hardware error.
No password or the default password is set
Charge lock active
Meaning

No WLAN network specified

WLAN module deactivated

WLAN module does not send any beacons
 At least one WLAN network defined

WLAN module activated
Number of flashes corresponds to number of connected
WLAN stations and P2P radio lines.
 DFS scanning or another scan procedure

Display of signal strength in client or P2P
Device has detected at least one hardware error.
Meaning
No network device connected
1 Ethernet connection active
Device is transmitting and/or receiving data
2 Ethernet connections active
19