Interfaces And Control Elements; Bat54-F - Hirschmann BAT series User Manual

1.2

Interfaces and control elements

1.2.1

BAT54-F

The device is equipped with the following connectors and operation
elements:
9
Main 1
IP67 WLAN Access Point
1 TX
2 3 2 RX
3 N.C.
4 GND
1 4
Pin Function
V.24 Reset
1 2
BAT54-F
Interfaces and display and control elements
1 V.24 Serial interface, 4-pin M12 socket with A coding, data rate min. 19.2 kbit/s, max.
115 kbit/s, connector for serial configuration cable
2 Reset Reset button behind a removable IP67 cap
restarts the device or resets the configuration
3 Ethernet Ethernet port:
4-pin M12 socket with D coding, 10/100BASE-TX, Autosensing, Power over
Ethernet (PoE), automatic MDI/MDIX recognition (no crossover cable required)
4 Power Power supply connector for safety extra-low voltage (SELV/PELV), 5-pin M12
plug
5 LED 4 display elements (power, LS/DA, WLAN1, WLAN2)
6 AUX 2 Auxiliary connector for the second WLAN module for connecting external
antennas
7 AUX 1 Auxiliary connector for the first WLAN module for connecting external antennas
8 Main 2 Main connector for the second WLAN module for connecting external antennas
9 Main 1 Main connector for the first WLAN module for connecting external antennas
20
8 7
Main 2 AUX 1
BAT54-F
Uin : 24 VDC
Uin : 48 VDC
1 +24V DC
2 0 V
1 TD+
2 3
RD+ 2 1 3 0 V
2
4 +24V DC
3 TD-
3 4 5 N.C.
4 RD-
1 4
5
Pin Function
Pin Function
Ethernet
Power
3 4
6
AUX 2
CLASS 2 Iin : 400 mA
CLASS 2 Iin : 170 mA (PoE)
P LS/DA
WLAN WLAN
1 2
LED
5 5
Power LS/DA
WLAN WLAN
1 2
Installation BAT
Release 05 03/2013