Table of Contents
Advertisement
In the SSID configuration page you have the following options:
– SSID - the name of your WiFi network, that clients will be able to see and connect to.
– Enable on radio - select at least one radio frequency, and that radio frequency will be added to
the WiFi network.
– Network name - select to which network that radio interface will be added.
– If you select a LAN network, the clients connected to the WiFi network will be on that local
network, and they will receive an IP address assigned by a DHCP server operating on the
board (this option is recommended).
* If DHCP service is disabled in LAN configuration, then the device will not be automat-
ically assigned an IP address. In such a case, you must manually configure an IP
address on your client device, and that IP must be on the same network.
* All the client devices on the same LAN network will be able to communicate with each
other easier.
– If you select a WAN network, the clients will receive an IP address assigned by your ISP
(internet service provider).
* This option will only work if your ISP provides multiple IP addresses for you. Contact
your ISP to ask if this option is available.
* The client devices on the WAN network will have a restricted access to devices on your
LAN networks.
SSID Security options
When creating a new SSID, you must select one of the available security modes for your access point:
– Open - network doesn't require authentication.
– WPA2 personal - network requires a pre-shared key (Passphrase).
– WPA2 enterprise - network uses advanced security measures. Requires you to enter authenti-
cation details that were provided to you by network administrators.
– WPA3 personal - brings better protections to individual users by providing more robust password-
based authentication.
– WPA3 enterprise - builds upon the foundation of WPA2-Enterprise with the additional requirement
of using Protected Management Frames on all WPA3 connections.
– WPA2/WPA3 personal - Supports both WPA2 and WPA3 personal modes.
AP3400
Figure 5.27.: SSID tab
42
User Manual for version 1.9.1
Advertisement
Table of Contents
