Table of Contents
Advertisement
Figure 5.30.: SSH service tab
To use SSH connection for device management, the AP3400 board must be accessible by it's IP
address from the computer that you are using to connect to the board.
AP3400
To connect via SSH you will also need to provide the username and password of an Admin level user.
The AP3400 by default has one Admin level user ("root"), and you can create more users in Settings
-> Users configuration page.
Telnet Services
Telnet is a network protocol that was built for interacting with remote devices and managing them. It
provides a two-way text-based communication channel between two machines, similar to SSH, but
less secure.
Figure 5.31.: Telnet service tab
NTP Services
The NTP (Network Time Protocol) service synchronizes the clock of the device with the defined online
time server. Enable NTP service and enter the NTP server address in order to use the NTP service.
AP3400
44
User Manual for version 1.9.1
Advertisement
Table of Contents
