Table of Contents
Advertisement
– Test changes - click arrow icon next to Save button and Test changes button will appear. By
clicking it, you are able to test changes before confirming or aborting them. You will have 3
minutes to check whether the new configuration is operational. If the Confirm button is not
clicked during that time, then the new configuration will be discarded and device will return to its
previous configuration.
– Configuration changes list - the button left of the Save button expands a list of configuration
changes you've made.
– Configuration errors list - the red button left of the Save button expands a list of errors in new
configuration. The button is only visible if the new configuration is invalid.
It is not required to press Save changes in every Web GUI tab. The device remembers all changes
made in every tab and Save button is pressed, all changes will be applied.
It is very useful to Test changes before accepting them. If device were to become unreachable due to
a new configuration, then device would return to its previous configuration after 3 minute time.
AP3400
24
User Manual for version 1.9.1
Advertisement
Table of Contents
