Table of Contents
Advertisement
5.2.2. Wireless Configuration
The Wireless configuration page allows the user to control the wireless interfaces of the device.
AP3400 boards have 2.4 GHz and 5 GHz radio interfaces.
Every radio has a toggle On/Off switch that enables or disables specific radio. Wireless radios can be
set into either Access point or Station mode.
– Access point (AP) - wireless mode allows you to create WiFi networks, to which other network
devices - clients - can connect.
– Station wireless mode - when this mode is selected, the AP3400 board itself will act as a
wireless client, so it can connect other wireless networks (access points).
Clients are all the network devices that are connected to the board's wireless network (WiFi).
AP3400
Figure 5.23.: Wireless settings tab
37
User Manual for version 1.9.1
Advertisement
Table of Contents
