Table of Contents
Advertisement
– User - specify the username for authentication.
– Server address - specify the SNMP trap destination server IP address or hostname.
– OID prefix - select the oid prefix. Object Identifier (OID) uniquely identifies the managed infor-
mation object in the information hierarchy.
– SNMPv2 protocol - the SNMP community string is used as an authentication means for accessing
the SNMP service on the board.
– SNMPv3 protocol - password - the password that will be used for the authentication.
For SNMPv3 Protocol AP3400 uses such configuration:
– Authentication protocol: SHA
– Security level: AuthPriv (Authentication and privacy policy)
– Privacy protocol: AES
AP3400
Figure 5.35.: SNMP Traps
47
User Manual for version 1.9.1
Advertisement
Table of Contents
