Table of Contents
Advertisement
Elevation Control Shaft (CTS-036)
Tools Required
Needle Nose Pliers
Prerequisites
Disassembly steps for maintenance associated with the service kit you received requires the following
prerequisites. For now, perform ONLY the disassembly steps in the following chapters in the order listed, then
return to this chapter for the remaining instructions.
1.
Dust Shroud (CTS-013)
NOTE:
If you have been directed to this chapter from another part of this manual, the prerequisites
section of the chapter you began with might list one or more of the same prerequisites seen
above. If you've already completed a listed disassembly, move on to the next instruction.
Disassembly Steps
IMPORTANT: To ensure thorough understanding, please read the instructions all the way
through before starting this procedure.
13mm Socket Wrench
2mm Allen Wrench
CTS Service Manual
Flat Head Screwdriver
|
40
Advertisement
Table of Contents
