Table of Contents
Advertisement
Fence Rail Guides "Pucks" (CTS-005)
Disassembly Steps
IMPORTANT: To ensure thorough understanding, please read the instructions all the way
through before starting this procedure.
1. Begin by removing the worn circular
pucks from the front of the saw.
Remove the
Lock Nuts - M4 x 0.7 [7]
behind both
Pucks - End, Inner Rail [1]
using a 3mm Allen Wrench at the bolt
and an 8mm wrench at the nut.
2. Remove the
Bolts - M5 x 0.8, 14mm, Flat
Head, Socket [2]
wrench and discard them along with
the nuts you removed in step 1.
using the 3mm Allen
|
CTS Service Manual
24
Advertisement
Table of Contents
