Trunnion Motor Cover (Cts-016) - SawStop CTS-015 Service Manual

Trunnion Motor Cover (CTS-016)

Trunnion Motor Cover (CTS-016)
Use the instructions in this chapter to install the Trunnion Motor Cover service kit you received.
WARNING:
To ensure safety during maintenance, disconnect all electrical power to the saw and remove
the saw blade.
NOTE:
For an optimal experience using this service manual, begin maintenance on your saw by
starting with the chapter most directly associated with the CTS service kit you received
containing replacement parts.
IMPORTANT:
If you have the optional stand for the CTS, remove the saw from the stand and perform this
maintenance on a suitable workbench.
Certain maintenance operations may be best performed with your CTS tipped on its edge or
perhaps even flipped upside down to rest on its top. As a result, many photos in this service
manual do not depict the CTS in its normal, upright orientation.
Description
The Trunnion Motor Cover is a plastic shroud visible from the outside of your CTS. It acts as an extension to the
Motor Cover and covers the Trunnion assembly.
Below are step-by-step instructions for the disassembly required to remove and then replace the Trunnion Motor
Cover. The disassembly instructions in this section are a common prerequisite to servicing other aspects of your
CTS.
|
CTS Service Manual 6