Carrier Access Wide Bank 28 DS3 User Manual page 340

TL1 Commands and Messages
TL1 Command List
Response Format:
9-66
<cr><lf><lf>
^^^<sid>^<YY-MM-DD>^<HH:MM:SS><cr><lf>
A^^<atag>^REPT^PM^<FacilityType>
^^^"[<FacilityId>]:<montype>,<monval>,[<vldty>],
[<locn>],[<dirn>],[<tmper>],[<mondat>],[<montm>]"
;
Field Description
FacilityType T1, E1, T3
FacilityID Facility ID depends on Facility Type:
• For T1, values are DS1-1 to DS1-28
• For E1, values are E1-1 to E1-27
• For T3, values are DS3-A, DS3-B
atag Automatic message tag. A sequential value is assigned to each
message by the Wide Bank. Receiving a non-sequential value
indicates that some messages have been lost.
dirn Direction of traffic:
• TRMT – transmit
• RCV – receive
locn Location:
• NEND – near end
• FEND – far end
mondat Date during which the time period started
montm Time during which the time period started
montype Monitored parameter type
monval Monitor Value
sid Source Identifier
tmper Time period that these statistics were gathered
• 15-MIN – 15 minutes
• 1-HR – 1 hour
• 1-DAY – 1 day
vldty Validity
• COMPL – complete
• PRTL – partial period
July 2004 Wide Bank 28 DS3 - Release 2.4