Carrier Access Wide Bank 28 DS3 User Manual page 271

Security:
Syntax:
Wide Bank 28 DS3 - Release 2.4
Set - admin with basic security (except that users can change their own passwords);
secu with Security Upgrade
Show - ro and above with basic security; secu with Security Upgrade
user ["username" {add|delete|level <admin|rw|ro>|
password}]
Field Description
user Use the command by itself to show the list of users.
"username" A user defined name. The string must be enclosed in double quotes.
Basic security – With basic security, user names must include from
1 to 10 alphanumeric characters and must not contain spaces. User
names are not case-sensitive when defined; however, users must log in
using lower-case characters.
With basic security, users do not require a password. If you want to
assign a password, use the user "username" password command
(described below).
Security Upgrade – With the Security Upgrade, user names must
include from 8 to 10 alphanumeric characters and must not contain
spaces. User names are case-sensitive.
With the Security Upgrade, a password is required for each user. A
prompt for entering the password appears immediately after a new
user name is accepted. See the following table for password
requirements.
Note: If you are upgrading firmware in an existing Wide Bank,
previously defined user names and passwords that contain fewer than
8 characters will be preserved. Blank passwords are also preserved.
add Add a user name. The number of users is limited to 10.
delete Delete a user name.
level Set a user's security level (see Security Levels on
<admin|rw|ro> description of the security levels). By default, a new user is assigned
the level ro.
Basic security – With basic security, only the levels rw and ro are
assignable. The admin level is automatically assigned to the admin
user, and no other user can have admin access.
Security Upgrade – With the Security Upgrade, users can be assigned
the levels admin, rw, or ro. The secu level is automatically assigned to
the secu user, and no other user can have secu access.
July 2004
CLI Commands and Messages
CLI Command List
page 8-4
for a
8-83