Carrier Access Wide Bank 28 DS3 User Manual page 137

NOTE:
changed to E1 instead of DS1.
4. Press Enter key (now talking to Controller card B).
01:00:29
Automatic Login to Controller Card B
Equipment
---------
DS3 Controller A
DS3 Controller B
DS1 Card 1
DS1 Card 2
DS1 Card 3
DS1 Card 4
DS1 Card 5
DS1 Card 6
DS1 Card 7
DS1 Spare Card
(B:Active)>
5. Type the load command again and enter the following command (Be sure to include the quotes
in the filename, and give the complete path):
(B:Active)> load tftp [TFTP server IP address] "[filename]"
Initializing memory buffer.Downloading Image using TFTP.
Please wait...
TFTP Download Finished
Verifying. Please wait...
Verification Successful
Wide Bank 28 DS3 - Release 2.4
When the CLI is in E1LS mode, the following low-speed circuit references are
01/01/1997
Status
------
Standby
Active
Active
Active
Active
Active
Active
Active
Active
Card not present
July 2004
Configuration
Downloading New Software
6-29