Carrier Access Wide Bank 28 DS3 User Manual page 100

Electrical Installation and Cabling
Low-Speed DS1/E1 Cables
DS1 Drain
Wires
Fasten DSX-1 Cables
to bar with cable ties
5-8
LOW SPEED
DS1 IN
External
LOW SPEED
Grounding
DS1 OUT
Lug
Figure 5-4 Connecting the Low-speed Cables
Spring-loaded Latch
Figure 5-5 Fastening & Tying Down Low-speed Cables
Connect the cable ends with the
drain leads to the LOW SPEED
IN (receive) and OUT (transmit)
connectors on the Wide Bank 28.
Note that the two cables are identical,
so transmit and receive integrity must
be observed.
Connector Retaining
Screws
July 2004 Wide Bank 28 DS3 - Release 2.4