Configuration
Downloading New Software
5. Click the "Send" button. The Xmodem transfer will start. The following status displays will
appear:
6. When the Xmodem download is completed, the system verifies the validity of the downloaded
file and a message is displayed indicating whether the download was successful.
7. A prompt asks if you want to program the FLASH now. If you say no, you will have to do it
later, using the program flash command. Until you program the FLASH, your Wide Bank will
continue to run using the old firmware.
6-34
July 2004
Wide Bank 28 DS3 - Release 2.4